• +91-265-2513595
  • +91-99250 16106

Effluent Treatment

We all know that water supply costs are going to carry on rising – so are water disposal costs. The more contaminated your effluent, the more your effluent handling company will charge you. Increasingly stringent discharge consent conditions are also being applied.

With the right treatment, a very significant proportion of waste process water may be perfectly suitable for reuse in other processes elsewhere on site, please take some time to study our effluent treatment chemical solutions.

There are four main cost saving to be exploited

  • Reduce the cost/m³ of your effluent water
  • Reduce the sludge volume leaving site
  • Recover heat from waste water
  • Recycle treated effluent water
...

Maxwell Corporation has an extensive range of products including:

  • Anionic, emulsion grade polymers: A range of high molecular weight anionic water-in-oil emulsions. These chemical products are suitable for in-line dilution before being added to the application.
  • Cationic emulsion grade polymers: A range of linear and structured cationic water in oil emulsions. These chemical products are suitable for in-line dilution before being added to the application.
  • Anionic, powder-grade polymers: Anionic powder-grade polymers available in low, medium and high molecular weights.
  • Cationic, powder-grade polymers: Cationic chemical powders available in a range of molecular weights.
  • Organic primary coagulants including polyamines and PolyDADMACS: High cationic charge products needed to destabilise negatively-charged colloidal particles and promote rapid floc formation. Low molecular weight and viscosity ensuring complete distribution and mixing of the polymer in the water.
  • Inorganic primary coagulants: A wide range of PAC based products, Ferric Sulphate and Ferric Chloride.
  • Anti-foams: Wide range of very effective anti-foam products.